Wood Filler For Hardwood Floor Refinishing. Set the angled tip of the tube into the gap and pull the trigger. For best results, use fine edger dust from the floor that is being sanded, mix it with lacquer to form a putty, and fill the floor as needed.
The thickness of this layer can range from 1mm to 8mm thick depending on the quality of the flooring. The store is open for one at a time visits during these hours: This is the way to remove age spots, pet spots, scratches, and spills that happened long ago.
Lacquer based wood floor filler is a mixture of lacquer and very fine wood dust.
Carefully remove any staples or nails to prevent damage to tools and the floor itself. Apply the stain with a foam applicator pad in the direction of the wood grain. Between coats of polyurethane, let the product dry completely (refer to manufacturer’s instructions for drying times) and buff the floor between each coat with a machine buffer or by hand with a #2 fine steel wool pad. Thin the filler with water to a pourable consistency before you use it.